Payment with: Money Order, Cashier's Check, Personal Check,
PayPal? Contact Seller.
Offering this new "Made-in-the-USA" Peerless Gear LTH 2000-015B modular hydrostatic transaxle at a slight discount off MSRP, depending on the source! MSRP on this P/N 794819 transaxle is $665.95 from Peerless Gear in the USA -- I don't know what the Australian MSRP is. This transaxle is factory-lubricated, ready to bolt-in and run.
If you cannot find the 2000-030 Number on your transaxle but the hydro module has a 7229P91 on its label and a 6796P92 label on the axle module, yours is a 2000-030 or 030A, and this transaxle will be the correct replacement. The 2000-030/-030A is obsolete and no longer available.
This new-in-box hydrostatic transaxle is manufactured to fit front-engine lawn tractors and ride-on mowers made by Australian Mower Company (AMC) and Allied Australia. It has a 4-3/4"-diameter (12 cm) input pulley mounted over the 7-1/4"-diameter (18.4 cm) cooling fan, with the V-pulley centerline 4-21/32" (11.8 cm) above the case-seam centerline. The speed-control lever is on the right side; the brake and free-wheeling controls are on the left side. It has 3/4"-diameter axle shafts that extend out from the case 5-7/8" (15 cm) on each side; the axles have 3/16" x 2-3/4" keyways with snap-ring grooves on the axle ends. The overall end-to-end axle length is approximately 31-5/16" (79.5 cm). The case has two sets of industry-standard mounting holes -- the close-together holes are on 13" side-to-side centers x 1-3/4" front-to-back centers (33 x 4.45 cm); the far-apart mount holes are on 16-1/4" x 2-1/2" centers (41.3 x 6.4 cm).
1. The support-strap hole on the corner of the transaxle, by the brake, is not threaded, since the mower manufacturer uses 5/16"-18 self-threading bolts to hold the front support(s) to these corners. If you are re-using your original bolts or equivalent OEM bolts, make sure they have clean threads when re-installing these supports. If you do not have the original-style bolts and are using standard machine-thread bolts for these front-corner supports, you will need to carefully tap these holes to match the threads of your bolts.
2. Make sure you have the support securely fastened to the transaxle or misalignment will occur.
1. To make this work correctly as a replacement for the 2000-030 transaxle, the one that uses the 7229P91 hydro module and the 6796P92 axle module originally, you may need to replace the control arm that comes on this transaxle with the one that is currently on your 2000-030, after modifying it so the foot-control linkage engages the control arm at the top instead of at the bottom. Otherwise, pedal-forward will be reverse on the transaxle, and pedal-reverse will be forward.
2. Make sure that any bypass/disconnect linkage allows the arm to move to the fully-engaged position when running or you will have hesitation ("hiccupping") and hydro-fluid overheating when running. Internal shaft damage may also occur.
This is a 'B'-Input transaxle -- it mounts in the mower with the input pulley, shift arm and brake BEHIND the axle. DO NOT ATTEMPT TO USE THIS TRANSAXLE on any rider where the transaxle is mounted with the input pulley, brake and shift arm AHEAD OF the axle, as it is not engineered for this mode of operation, and will not perform properly.
QUESTIONS? Please -- if you are attempting to use this transaxle to replace a different transaxle -- before you ask a "Will-it-fit?" question, compare the measurements of your transaxle to the dimensions I have listed above for this transaxle, and note the Model and Serial Numbers off your current transaxle. Yes, that may require safely jacking up your mower, removing a wheel, then crawling under the mower with a scale, tape measure, flashlight and notepad, as well as a rag to carefully clean off dirt and grease. In your question, also include the Model and Serial Number off the mower. It may even require you to remove the transaxle from the tractor to read the ID labels. Thanks!
No sales tax if sold outside Missouri. Sales tax of 5.225% must be charged to a Missouri Buyer.
SHIPPING: Buyer pays shipping on my Items from Postal Code 64730 USA. I can ship these Items worldwide. Within the USA, Item will be shipped UPS Ground Insured unless the buyer specifies otherwise. Item will be shipped promptly after receiving proper payment. If the eCrater Shipping Wizard costs appear to be high in your Checkout, please read our Store's "Terms" before being scared off by the Shipping Wizard's freight costs, and use the "Ask Seller a Question" link, if necessary.
And please make sure the eCrater Home Page Heading displays the Stars-&-Stripes with the "U.S." notation in the upper-right corner so prices will be displayed in U.S. Dollars, not Australian Dollars or British Pounds.
PAYMENT Options --
INTERNATIONAL: Contact Seller for international payment options.
USA: We prefer a money order, bank draft or certified check payment sent via Postal Mail. We can also accept a business or personal check, but these require a 4-7 day clear period...except...we consider a check drawn on a Credit Union to be the same as a certified check.
PAYPAL -- Contact Seller.
FEEDBACK: Our Feedback is 100%, which is good. The latest Feedback, however, is in December of 2011, which may raise questions. The reason for this is because we had to drop PayPal as an Approved Payment Method in our Store due to eCrater’s restrictions, and the only way Feedback can be left is if we show PayPal as an Approved Payment Method and the Buyer pays with PayPal through the eCrater Checkout. For this reason, there are no Feedbacks since December of 2011, even though we’ve had hundreds of satisfied customers since then. If you would like to get a referral from a recent customer near you, please let us know. We have nothing to hide, and your satisfaction is our priority.
Our philosophy..."No matter how many material possessions or awards you may acquire in your lifetime, the only thing you will ever truly own is your reputation."
Other Products from roms-peerless-transaxle-supply: