Payment with: Money Order, Cashier's Check, Personal Check,
Sold out. These transaxles are now obsolete.
PAYPAL...? Contact Seller.
Please read our Store's "Terms" before being scared off by the Shipping Wizard's freight costs, and use the "Ask Seller a Question" link, if necessary. And please make sure the eCrater Home Page Heading displays the Stars-&-Stripes with the "U.S." notation in the upper-right corner so prices will be displayed in U.S. Dollars, not Australian Dollars or British Pounds.
Offering this new "Made-in-the-USA" Peerless 'B'-Input 6-Forward-speed-plus-Neutral-&-Reverse 930-038 transaxle with full factory warranty at a 62% discount off Snapper's $766.00 MSRP -- almost 2/3 off! This transaxle is factory-lubricated, ready to bolt-in and run.
This in-line-shift, gear-drive, new-in-box 6-speed Model 930-038 Peerless transaxle was originally manufactured to fit the Snapper LT125G Series of front-engine lawn tractors. This includes both the LT125G33 and LT125G41 tractors as well as the Export versions. It has a 5/8"-diameter x 1-3/16"-tall input shaft with keyway and snap-ring groove, 3/4"-diameter axle shafts with keyways and snap-ring grooves on the ends, and the short, square-end shift shaft as shown. The overall end-to-end axle length is approximately 28-3/4""; the axle ends extend out from the case approximately 4-5/8" on the left side and 4-1/2" on the right side. The case has two sets of industry-standard mounting holes -- the close-together holes are on 13" side-to-side centers x 1-3/4" front-to-back centers; the far-apart mount holes are on 16-1/4" x 2-1/2" centers.
Being new, this transaxle is covered by the Peerless 2-year Consumer Use/90-day Commercial Use/30-day Rental Use Limited Warranty within the USA and the 1-year Consumer/90-day Commercial/30-day Rental Limited Warranty outside the USA. A dated receipt will be provided to validate the warranty, dated to reflect its arrival at your place so you won't lose warranty coverage for travel time. Note that the warranty covers defects in material and workmanship -- it is not a blanket guarantee against abuse and mistreatment -- and there is NO warranty if this transaxle is used for competition purposes. A copy of the Peerless Warranty will also be included with the transaxle.
This transaxle is Snapper P/N 7022434 (old number 2-2434 as shown on the case). Current Snapper MSRP on this 7022434 / 2-2434 transaxle is $766.00; my price makes this new upgraded transaxle available to you for 38% of MSRP -- just over 1/3!
MOUNTING NOTE: The frame-support holes on the lower corners of the transaxle are not threaded, since the mower manufacturer uses 5/16"-18 self-threading bolts to hold the support(s) to these corners. If you are re-using your original bolts or equivalent OEM bolts, make sure they have clean threads when re-installing these supports. If you do not have the original-style bolts and are using standard machine-thread bolts for these front-corner supports, you will need to carefully tap these holes to match the threads of your bolts. WARNING: If you plan on pre-tapping these holes, the case material is only about 0.060" (1/16") thick at the back of these holes, so measure the hole depth and set your tap accordingly, or you will break through the case into the gear-lube area.
For the technically-minded Buyer, the Forward-shift gear ratios are: 1st) 4.56:1, 2nd) 2.13:1, 3rd) 1.50:1, 4th) 1.17:1, 5th) 1:1, and 6th) 0.67:1. Reverse is 1.40:1, Input pinion ratio is 3.00:1, and final-drive/differential ratio is 6.68:1.
DO NOT ATTEMPT TO USE THIS 'B'-Input TRANSAXLE AS-IS on a rider where the transaxle is mounted with the input pulley, brake and shift arm AHEAD OF the axle ('A'-Input) or you will have 1 Forward speed and 6 Reverse speeds.
QUESTIONS? Please -- before you ask a "Will-it-fit?" question -- compare the measurements of your transaxle to the dimensions I have listed above for this transaxle, and note the Model and Serial Numbers off your current transaxle. Yes, that may require safely jacking up your mower, removing a wheel, then crawling under the mower with a scale, tape measure, flashlight and notepad, as well as a rag to carefully clean off dirt and grease. In your "Question," also include the Model and Serial Number off the mower. Thanks!
No sales tax if sold outside Missouri. Sales tax of 5.225% must be charged to a Missouri Buyer.
SHIPPING: Buyer pays shipping from Postal Code 31763 USA. I can ship this Item worldwide. Within the USA, Item will be shipped UPS Ground Insured unless the buyer specifies otherwise. Item will be shipped promptly after receiving proper payment. If the eCrater Shipping Wizard costs appear to be high in your Checkout, please let us know.
PAYMENT Options --
PREFERRED: We prefer a money order, bank draft or certified check payment. We can also accept a business or personal check, but these require a 4-7 day clear period...except...we consider a check drawn on a Credit Union the same as a certified check.
PAYPAL: Email Seller for PayPal requirements if interested.
INTERNATIONAL: The best form of payment for an international buyer is either a bank-to-bank wire transfer in USD or an International Money Order from your bank payable in USD and posted to me. Contact Seller for details.
FEEDBACK: Our Feedback is 100%, which is good. The latest Feedback, however, is in December of 2011, which may raise questions. The reason for this is because we had to drop PayPal as an Approved Payment Method in our Store due to eCrater’s restrictions, and the only way Feedback can be left is if we show PayPal as an Approved Payment Method and the Buyer pays with PayPal through the eCrater Checkout. For this reason, there are no Feedbacks since December of 2011, even though we’ve had hundreds of satisfied customers since then. If you would like to get a referral from a recent customer near you, please let us know. We have nothing to hide, and your satisfaction is our priority.
Our philosophy..."No matter how many material possessions or awards you may acquire in your lifetime, the only thing you will ever truly own is your reputation."
Other Products from roms-peerless-transaxle-supply: