view cart menu separator categories menu separator faq
advanced search
categories  > Lawn Mower (26)
New Peerless 5-speed 801-062B Transaxle fits Toro -Wheel Horse ( 801-019 )
 

New Peerless 5-speed 801-062B Transaxle fits Toro -Wheel Horse ( 801-019 )

Price: $495.00 add to cart     
Feedback: 100%, 64 sales Ask seller a question
Shipping: US-Mainland: $50.80 (more destinations)
Sales Tax: Missouri: 5.23%
Condition: Brand new
Payment with: Money Order, Cashier's Check, Personal Check,
PAYPAL...? Contact Seller.

Please read our Store's "Terms" before being scared off by the Shipping Wizard's freight costs, and use the "Ask Seller a Question" link, if necessary. And please make sure the eCrater Home Page Heading displays the Stars-&-Stripes with the "U.S." notation in the upper-right corner so prices will be displayed in U.S. Dollars, not Australian Dollars or British Pounds.

Offering this new 801-062B transaxle with full factory warranty at a 25% discount off the Peerless $658.11 MSRP -- 1/4 off! This transaxle is factory-lubricated, ready to bolt-in and run.

This in-line-shift, gear-drive, new-in-box, "Made-in-the-USA" 5-Forward-speed (+ Neutral and Reverse) Model 801-062B Peerless transaxle is manufactured to fit Toro and Wheel Horse front-engine riding mowers and lawn tractors. It has a 5/8"-diameter x 1-3/16" tall input shaft with Woodruff Key and snap-ring, 3/4"-diameter axle shafts with keyways and snap-ring grooves on the ends, and the short (5/8"-tall), twin-flat-end shift shaft as shown. The overall end-to-end axle length is approximately 29"; the axle ends extend out from the case 6" on each side. The case has industry-standard mounting holes on 13" side-to-side centers x 1-3/4" front-to-back centers; these holes accept either 5/16" or 8mm bolts. The axle-housing ends are also rounded to accept U-bolts in certain applications.

This 801-062B transaxle can be used in place of other 800- and 801-Series transaxles. With its industry-standard mounting holes, it can replace a variety of Peerless or Dana/Spicer transaxles used on front-engine riding mowers. Simply compare the dimensions listed above to the dimensions of your transaxle. It is also close to the 801-019 Series except this 801-062B has a left axle 3/4" longer and aright axle 3/8" shorter than the 801-019. Everything else is the same except for the brake lever, and if you want to use this to replace an 801-019, let me know and I will install the correct brake lever.

The top case on this transaxle also has provision for installing the neutral-safety switch used on some mowers -- simply remove the yellow press-in plug and install your switch.

Being new, this transaxle is covered by the Peerless 2-year Consumer Use/90-day Commercial Use/30-day Rental Use Limited Warranty within the USA and the 1-year Consumer/90-day Commercial/30-day Rental Limited Warranty outside the USA. A dated receipt will be provided to validate the warranty, dated to reflect its arrival at your place so you won't lose warranty coverage for travel time. Note that the Peerless Warranty covers defects in material and workmanship -- it is not a blanket guarantee against abuse and mistreatment -- and there is no warranty if this transaxle is used for competition purposes. A copy of the Peerless Warranty will be included with the transaxle.

MOUNTING NOTE: The holes on the front corners of the transaxle are not threaded, since the mower manufacturer uses 5/16"-18 self-threading bolts to hold the front support(s) to these corners. If you are re-using your original bolts or equivalent OEM bolts, make sure they have clean threads when re-installing these supports. If you do not have the original-style bolts and are using standard machine-thread bolts for these front-corner supports, you will need to carefully tap these holes to match the threads of your bolts. WARNING: If you plan on pre-tapping these holes, the case material is only about 0.060" (1/16") thick at the back of these holes, so measure the hole depth and set your tap accordingly, or you will break through the case into the gear-lube area.

For the technically-minded bidder, the Forward-shift gear ratios are: 1st) 3.08:1; 2nd) 1.50:1; 3rd)1.00:1; 4th) 0.79:1; and 5th) 0.67:1. Input pinion ratio is 3.00:1; final-drive/differential ratio is 6.69:1; Reverse ratio is 1.40:1. Internally, it also has the 4-key shift shaft.

DO NOT ATTEMPT TO USE THIS TRANSAXLE AS-IS ON A REAR-ENGINE RIDER, or on any rider where the transaxle is mounted with the input pulley, brake and shift arm BEHIND the axle, or you will have 1 slow forward speed and 5 reverse speeds.

No sales tax if sold outside Missouri. Bates County sales tax of 5.225% must be charged to a Missouri Buyer.

QUESTIONS? I will check this Ad whenever I can while it is running. Please -- before you ask a "Will-it-fit?" or "Will it work?" question -- compare the measurements of your transaxle to the dimensions I have listed above for this transaxle, and note the Model and Serial Numbers off your current transaxle. Yes, that may require safely jacking up your mower, removing a wheel, then crawling under the mower with a scale, tape measure, flashlight and notepad, as well as a rag to carefully clean off dirt and grease. In your "Question," also include the Model and Serial Number off the mower. Also include your email address so we can keep all our correspondence in one document for less-confusing record-keeping. A Question without a valid, Replyable email address may not be answered! Thanks!

SHIPPING: Buyer pays shipping from 64730 Butler, Missouri, USA. I can ship this transaxle insurance-included worldwide. Within the USA, Item will be shipped UPS Ground Insured unless the buyer specifies otherwise. Item will be shipped promptly after receiving proper payment. If the eCrater Shipping Wizard costs appear to be high in your Checkout, please let us know.

PAYMENT Options --
PREFERRED: We prefer a money order, bank draft or certified check payment. We can also accept a business or personal check, but these require a 4-7 day clear period...except...we consider a check drawn on a Credit Union the same as a certified check.
PAYPAL: Email Seller.
INTERNATIONAL: Contact Seller for details.

FEEDBACK: Our Feedback is 100%, which is good. The latest Feedback, however, is in December of 2011, which may raise questions. The reason for this is because we had to drop PayPal as an Approved Payment Method in our Store due to eCrater’s restrictions, and the only way Feedback can be left is if we show PayPal as an Approved Payment Method and the Buyer pays with PayPal through the eCrater Checkout. For this reason, there are no Feedbacks since December of 2011, even though we’ve had hundreds of satisfied customers since then. If you would like to get a referral from a recent customer near you, please let us know. We have nothing to hide, and your satisfaction is our priority.

Our philosophy..."No matter how many material possessions or awards you may acquire in your lifetime, the only thing you will ever truly own is your reputation."
Other Products from roms-peerless-transaxle-supply:View all products
New 8” Beadlock® Wheel Rims w/ Offset Keyed 1”-Bore Hubs; ATV, Go-Kart or Mower Racing
$78.00
New 6-Speed Peerless 820-040 ( 820-016 / 794513 ) Transaxle, fits Sears, Craftsman, Poulan
$697.00
New Input-Shaft Pulley, 7-5/8" Diameter, fits PermaGreen© Centri & Ultra
$27.00
New Peerless Conversion Transaxle: 915-032 & 915-029 on Murray, Garden Way, Sears Rear-Engine Riders
$379.00
Gearset Upgrade 2 for Peerless 820 Transaxle; Mower Racing or Pulling
$182.00
New Pair Offset 8" Wheel Rims with 4-on-4" Lug Pattern; fit Mower Racing, Others
$38.00
Otter Box Defender Series iPhone 6 Case
$36.00
New Replacement 6-speed Peerless MST 206-578 Transaxle; Fits European Husqvarna, Others
$345.00
New Pair 8 x 7 "High-Speed" Wheel Rims with "4-on-4" Lug Pattern; fit Deere, Mower Racing, others
$35.00
New Peerless MST 202-555A Transaxle; fits Murray Vari-Drive
$185.00
Last Updated: 12 Jul 2017 14:11:10 PDT home  |  about  |  terms  |  contact
Powered by eCRATER - a free online store builder