Payment with: Money Order, Cashier's Check, Personal Check,
PAYPAL...? Contact Seller.
Please read our Store's "Terms" before being scared off by the Shipping Wizard's freight costs, and use the "Ask Seller a Question" link, if necessary. And please make sure the eCrater Home Page Heading displays the Stars-&-Stripes with the "U.S." notation in the upper-right corner so prices will be displayed in U.S. Dollars, not Australian Dollars or British Pounds.
Offering this new replacement "Made-in-the-USA" MST 206-549B transaxle with full factory warranty. This transaxle is factory-lubricated, ready to bolt-in and run.
The $349.00 selling price is as shown in the picture, with a threaded plug in place of the neutral-safety switch to prevent damage to the switch during shipping. The switch is included with the transaxle, taped to the inside of the box. When you get the transaxle, simply remove the plug and install the switch. If you have other non-functioning neutral-switch issues, please contact us before ordering. If you also need new wheel hubs or a new pulley for your transaxle, I offer these as well -- see my other Listings.
This replacement, in-line-shift, gear-drive, new-in-box 6-Forward-speed (+ Neutral and Reverse) Model MST 206-549B Peerless replacement transaxle fits most PermaGreen® Ultra and Centri model seeder-spreaders. (The Magnums and Triumphs use a different model transaxle.) It has a 5/8"-diameter x 1-3/16" tall vertical input shaft with keyway and snap-ring groove, 3/4"-diameter axle shafts with keyways and snap-ring grooves on the ends, and the tall, square-end shift shaft. The overall end-to-end axle length is approximately 30"; the axle ends extend out from the case approximately 5-3/16" on each side. The case has two sets of industry-standard mounting holes -- the close-together holes are on 13" side-to-side centers x 1-3/4" front-to-back centers; the far-apart mount holes are on 16-1/4" x 2-1/2" centers.
NOTE: Even though this is a 6-speed transaxle, I've been told that PermaGreen only uses two of the Forward speeds on the Ultras and Centris. I've never been able to determine why.
Photo 2 shows the pump-drive shaft extension on the right side of this transaxle. This fine-splined shaft is approximately 1/2" diameter x 3/4" long, and has 36 splines.
Being new, this transaxle is covered by the Peerless 2-year Consumer Use/90-day Commercial Use/30-day Rental Use Limited Warranty within the USA and the 1-year Consumer/90-day Commercial/30-day Rental Limited Warranty outside the USA. A dated receipt will be provided to validate the warranty, dated to reflect its arrival at your place so you won't lose warranty coverage for travel time. Note that the warranty covers defects in material and workmanship -- it is not a blanket guarantee against abuse and mistreatment. A copy of the Peerless Warranty will also be included with the transaxle.
MOUNTING NOTE: The holes on the lower-front corners of the transaxle are not threaded, since the OEM uses 5/16"-18 self-threading bolts to hold the front support(s) to these corners. If you are re-using your original bolts or equivalent OEM bolts, make sure they have clean threads when re-installing these supports. If you do not have the original-style bolts and are using standard machine-thread bolts for these front-corner supports, you will need to carefully tap these holes to match the threads of your bolts. WARNING: If you plan on pre-tapping these holes, the case material is only about 0.060" (1/16") thick at the back of these holes, so measure the hole depth and set your tap accordingly, or you will break through the case into the gear-lube area.
For the technically-minded bidder, the Forward-shift gear ratios are: 1st) 2.64:1; 2nd) 2.07:1; 3rd)1.30:1; 4th) 1.00:1; 5th) 0.90:1; and 6th) 0.60:1. Input pinion ratio is 2.31:1, and final-drive/differential ratio is 9.89:1.
CORROSION PREVENTION NOTE: Some customers have asked if we have any way to prevent corrosion on these new transaxles, something that's difficult to do on a PermaGreen unit. Other customers have told us that spray truck-bed liner works. A good locally-available aerosol product is also RustOleum® LeakSeal Flexible Rubber Coating in Black, Part Number 265494, BarCode 0 20066 21874 4. Whatever you use, just make sure to cover any movable linkage parts so the coating doesn't hinder proper movement of necessary components.
DO NOT ATTEMPT TO USE THIS TRANSAXLE AS-IS on a unit where the transaxle is mounted with the input pulley, brake and shift arm BEHIND the axle or you will have 1 forward speed and 6 reverse speeds.
QUESTIONS? Please -- if you are attempting to use this transaxle to replace a different transaxle -- before you ask a "Will-it-fit?" question, compare the measurements of your transaxle to the dimensions I have listed above for this transaxle, and note the Model and Serial Numbers off your current transaxle. Yes, that may require safely jacking up your unit, removing a wheel, then crawling under the unit with a scale, tape measure, flashlight and notepad, as well as a rag to carefully clean off dirt and grease. In your question, also include the make, Model and Serial Number off the unit. Thanks!
No sales tax if sold outside Missouri. Sales tax of 5.225% must be charged to a Missouri Buyer.
SHIPPING: Buyer pays shipping from Postal Code 64730 USA. I can ship this Item worldwide. Within the USA, Item will be shipped UPS Ground Insured unless the buyer specifies otherwise. Item will be shipped promptly after receiving proper payment. If the eCrater Shipping Wizard costs appear to be high in your Checkout, please let us know.
PREFERRED: We prefer a money order, bank draft or certified check payment. We can also accept a business or personal check, but these require a 4-7 day clear period...except...we consider a check drawn on a Credit Union the same as a certified check.
PAYPAL: Contact Seller.
INTERNATIONAL: Contact Seller for details.
FEEDBACK: Our Feedback is 100%, which is good. The latest Feedback, however, is in December of 2011, which may raise questions. The reason for this is because we had to drop PayPal as an Approved Payment Method in our Store due to eCrater’s restrictions, and the only way Feedback can be left is if we show PayPal as an Approved Payment Method and the Buyer pays with PayPal through the eCrater Checkout. For this reason, there are no Feedbacks since December of 2011, even though we’ve had hundreds of satisfied customers since then. If you would like to get a referral from a recent customer near you, please let us know. We have nothing to hide, and your satisfaction is our priority.
Our philosophy..."No matter how many material possessions or awards you may acquire in your lifetime, the only thing you will ever truly own is your reputation."
Other Products from roms-peerless-transaxle-supply: